Optické sítě

Optical switchboard/box for location on DIN gray color for max. 8 SC simplex couplings, metal with screwable lid for finishing max. 12 optical fibers. The box has 4 cable inputs and is supplied with 2 cable bushings PG11 and two plugs. No...

Outdoor optical pillar switchboard (column) 300x1500x250 mm with IP44, UV durable; The switchboard is already fitted with a monagant plate and an optical cassette for 12 welds and 4 tied hooks. Parameters: Name; Value; Material: polyester fibers; Kry ...

Outdoor optical pillar switchboard (column) 300x1320x250 mm with IP44, UV resistant; The switchboard is suitable for assembly of low-voltage electrical equipment (up to 500 V). Any optical equipment can be placed on the supplied mounting plate (300 x 400 mm). Pa ...

The 10/8mm microtube clutch is used to connect the microt runs. The clutch ensures protection against water and dirt. It is resistant to microfibre blowing. It is not advisable to use it for microtubes stored directly in the ground. Diameter of microtubes: 10 and ...

Cable chamber SGLB 1620 with HDPE lid, without bottom. Dimensions: height 508mm, width 406mm, depth 427mm. The load capacity of the chamber is up to 1.35t.

UV-resistant thick-walled microtube suitable for installations, which is exposed to direct sunlight.

Simple pliers for deribonization of new generation fiber fiber tapes-Rollable Ribbons. In one stroke you divide the scrollable belt into 12 individual fibers. The pliers are used for simple deribonization of the fibers. However, they are designed only for ...

This optical micro cable is designed for outdoor environments, especially for blowing into HDPE pipes and tubes. The optical fiber G.657A is guided in the gel filled with tubes wrapped around the central tensile element. Operating temperature range-30 ° C to +70 ...

19"Patchpanel for 12 cartridges. Each cassette is fitted with 12 SC/APC couplings and cassettes with pigtails ready to weld the optical cable.

Optical microBel suitable for blowing. Crisal 4,000 m supplied in a plastic protective cassette.

The minimum amount for collection is 200 m, for smaller orders, please contact the manager product first. The microtubes are made of high-dense polyethylene (HDPE) and are used to install optical cables and volumes of optical fibers. Main...

The minimum amount for collection is 200 m, for smaller orders, please contact the manager product first. Microhard microtube can be installed in HDPE protective pipes OTTOHARD different diameters, depending on the inner diameter of the protective and the outer diameter ...

The 7/4mm microtube clutch is used to connect the microt runs. The clutch ensures protection against water and dirt. It is resistant to microfibre blowing. It is not advisable to use it for microtubes stored directly in the ground. Diameter of microtubes: 7 and 4m ...

Reduction of a microtube 14/10mm (8mm) is used to connect microt runs of different diameters. Reduction ensures protection against water and dirt. It is resistant to microfibre blowing. It is not advisable to use it for microtubes stored directly in the ground. PR ...