PoE power

Gigabit PoE Injector/Splitter with LED for power. Injects or splits DC power on all 8 wires. 3678(-) 1245(+) Wire terminal connector. Black Color. 2.25A. Can be used for Starlink DC powering with slight cable/pinout modification ( this or this )!; Feat...

Tycon TP-POE-HP-48G is a gigabit power supply/poE inserter that supports up to 50W DC PoE output and is designed to power high-volume devices. This source supports power on pins 4.5 (V +) and 7.8 (-). ; ; Properties: ; Powering the device...

Tycon TP-DCDC-4848G-HP is HP voltage converter with passive Poe-out output (PIN 4.5 +, pin 7.8-). Input voltage 36-72VDC is regulated at 56V/0.9A. The source has two insulated inputs for redundant power supply. Use: 48V battery systems; Wireless ...

Source with active POE (802.3AF) and output power 15.4W.

Tycon Systems TP-POE-10G-BT60 is a professional gigabit PoE++ injector of the IEEE 802.3bt Type 6 standard, designed for powering energy-intensive network devices such as PTZ cameras, Wi-Fi 7 access points, or industrial switches. The unit supports a 1...

MikroTik CSS610-8P-2S+IN is a manageable PoE switch with 8 gigabit ports and 2 SFP+ bays supporting 10 Gbps transmission. PoE-out with a total budget of 140 W is supported on all ports.

CSE IS7212S-8P is an industrial full gigabit PoE switch with 12 ports. It offers 8x 10/100/1000 Base-T ports (PoE 802.11af/at, total PoE budget 270 W) and 4x 1000 BASE-X SFP ports (uplink). Extended temperature range, redundant power supply, alarm relays or p...

Properties: ; Input voltage 9-36VDC, output voltage 48V IEEE 802.3af ; IEEE 802.3af Injector ; Dual Power Inputs for 2 Power Supply (Reducing Power) ; Integrated gigabit PoE feed ; Protection against short circuit, overvoltage ; Made in ind...

Passive PoE.H 1Gb passive module with overvoltage protection and DIN rail protection ; ; Operating voltage: 8-56V via a removable connector ; Output current: 1.4A max. (0.35A/500mA fuse protected) ; Operating temperature:-30-+ 60 ° C ; Local...

Gigabit PoE Injector with input voltage 48V

Passive POE set with power cable. Complete set of 2 pieces in the package.

Gigabit Poe Injector from microtics to power any routerboard or other device with integrated PoE splitter. Injector supports 9-48 V adapters (max. 2A) and allows communication at 1 Gbps.

Tycon TP-DCDC-4848GD HP's HP-voltage converter with PoE port with power by 802.3. Input voltage 36-72VDC regulated at 56V/0.625. Source has two isolated inputs for redundant power supply. ; ; Application: ; 48V battery systems ; Wireles...

Outdoor PoE extractor to power most Routerboard or devices from Ubiquiti gigabit port. This is a converter of active power marked as 802.3af passive PoE 24V/0.5A maximum load 12W. ; Features: ; ; ; Name ; Value ; ; Operating temperatu...

; The DL2U Injector/Distribution (15x) is a 19"chassis with a height of 2U, which contains 15 positions for PoE.Z 1Gb PoE.EU plug-in module or DL.Z 24480303. The individual positions are numbered 1-15. Positions can be masked by means of patches (not...

The 802.3AF/AT/BT POE device with 10 GBPS support for a device with an output of up to 60W.

Shielded passive PoE injector/splitter specially designed for powering Starlink units. Power up to 130W, power supply on all pairs.

TP-DCDC-4824G-HP from TYCON POWER is a highly effective solution DC/DC drivers for those who require passive power supply via Ethernet from the 48 V voltage source, such as a battery system or vehicle. They are equipped with an integrated POE injector ...

Table switch 8 x 10/100Mbps. The advantage of switch is 4 ports (pd) according to standard 802.3af

POE Injector to power remote devices using a network (UTP) cable.

Quality power supply 12V/0.85 and DC with integrated POE.

Quality power supply 18V/1 and DC with integrated POE. This source can be used for all routerboard boards that integrate POE Extractor

DCDC converter with integrated passive PoE injector, input voltage 9-36VDC (redudant), output voltage 18VDC, 18W

DCDC converter with integrated passive PoE injector, input voltage 9-36VDC (redudant), output voltage 24VDC, 19W