Installation material

Satellite coaxial cable clutch.

The F-angle connector is used, for example, for satellite receivers, where it is not possible to put a straight F connector on the back panel due to a small place.

Connecting SCART cable for connecting common AV devices such as DVD players, digital TV receivers, satellite receivers and of course TVs. The length of the cable is 3 meters. All 21 pins are involved.

Connecting SCART cable for connecting common AV devices such as DVD players, digital TV receivers, satellite receivers and of course TVs. The length of the cable is 5 meters. All 21 pins are involved.

Coaxial cable designed for all outdoor wiring, but also other use. The cable has a diameter of 5 mm and an impedance of 75 ohm.

Connecting SCART cable for connecting common AV devices such as DVD players, digital TV receivers, satellite receivers and of course TVs. The length of the cable is 2 meters. All 21 pins are involved.

Cinch connector suitable for audio and video use. ; -female; -dismountable, screwdriver; -plastic with metal contact

IEC connector-direct. The connector is used to end the antenna cable at the modulator output. The interior of the connector is metal!

IEC connector-angular. The connector is used to end the antenna cable at the modulator output. The interior of the connector is metal! The connector is angular.

IEC connector Kolík-angular Thai. The connector is used to end the antenna cable to the modulator input. The interior of the connector is metal! The connector is angular.

The F 5mm connector is used to end the coaxial cable of 75 Ohm, eg Belden H121 or CB500.

The F 4.5mm connector is used to end the coaxial cable of 75 Ohm.

Connecting SCART cable for connecting common AV devices such as DVD players, digital TV receivers, satellite receivers and of course TVs. The length of the cable is 1 meters. All 21 pins are involved.

Compression IEC connector (pin) designed for professional connections with very low losses with a wide operating group of up to 3 GHz. Water durable cable and connector with corrosion resistance thanks to material made of colored metals.

Rubber seals for connectors F to ensure waterproof joint, eg between the converter and the F connector.

This clutch F-18x socket allows you to combine 9 cables that are finished with F-connectors. The clutch is designed for mounting on the wall or in the cabinet. Suitable for connection of grounding.

Professional quick coupling F (pin)/F (pin).

The F-angle connector is used, for example, for satellite receivers, where it is not possible to put a straight F connector on the back panel due to a small place.

This clutch F-IEC connector-socket serves as a reduction from F-connector on the IEC.

Counter F-IEC connector-connector serves as a reduction from F-IEC connector.

This clutch F-IEC socket-socket serves as a reduction from F-connector on the IEC.

F--BNC reduction is used to reduce the cable with a connector F to the cable with the BNC connector.

BNC connector (pin)-criminal for RG-59

Professional compression connector designed for 5mm cables such as Belden H121, CB500, etc.